The villain returns - Evil Maleficent sketches are art - set of bookmarks

Week 30 set 3 - collection of art of the sleeping beauty villain Maleficent.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 3mm and the Actual Depth is 2.8mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Red At layer #10 (0.88mm) swap to Lilac Purple At layer #16 (1.36mm) swap to Jade White for the rest.