3rd Bonus set uploaded tonight. This is more of an orient style of ink painting showing the panda in the trees. Enjoy.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x205mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #13 (1.12mm) swap to Beige
At layer #17 (1.44mm) swap to White for the rest.
