The mushroom Queen walking the road - Set of Bookmarks

Week 17 set 2. This bookmark set is a fantasy depiction of the Mushroom Queen. She walks around spreading spores and helping to rid the world of waste.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.9x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Green At layer #12 (1.04mm) swap to Pink At layer #19 (1.6mm) swap to Jade White for the rest.