This is a trial of a different method of story telling with bookmarks. It is first in hopefully an ongoing series of "Versus Bookmarks".

What does this mean? I developed artwork showing two sides engaged in battle. This first set is that of Zeus vs Odin. All of the Zeus sides are done in a red and are printed together (or however you want). The Odin sides are done in greys. Wen put together the pictures combine for one scene.

Please, let me know your impressions on this new idea for designs.

For the Zeus models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.56x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Pink At layer #14 (1.2mm) swap to Beige At layer #19 (1.6mm) swap to Jade White for the rest.

For the Odin Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.56x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #14 (1.2mm) swap to Beige At layer #19 (1.6mm) swap to Jade White for the rest.