This is a third clockface I am sharing that was designed to be printed for an upcoming charity fundraiser. This one is of a classic dragon.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 225x225mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Dark Brown At layer #15 (1.28mm) swap to Beige At layer #21 (1.76mm) swap to Jade White for the rest.