Bonus set for week 22 - Snow white in a bit of a different look. She has her own battle armor. 5 colors
for this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 70.23x210mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA Default White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Brown
At layer #10 (0.88mm) swap to Pink
At layer #13 (1.12mm) swap to Latte Brown
At layer #18 (1.52mm) swap to White for the rest.