Portraits of Santa Claus - Christmas can be a serious business - Set of bookmarks for all
One of this weeks sets is going to be for everyone. Santa with his serious face on.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Red At layer #8 (0.72mm) swap to Beige At layer #17 (1.44mm) swap to Jade White for the rest.