Nightmares and Horrors come alive from the pages of the books - Wall art

6th in the series - this one depicting the creation of monsters from the pages of books.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 167.78x209.73mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to Beige At layer #17 (1.44mm) swap to Ivory White for the rest.