More Anime Fanart - Again Monkey D Luffy from One Piece - Set of bookmarks

Week 29 - third set is luffy from One Piece. Different colors seem to work well together.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Pink At layer #12 (1.04mm) swap to Latte Brown At layer #19 (1.6mm) swap to Ivory White for the rest.