Messy little creature, Pikachu playing in the Popcorn Fanart

Another Art piece. No collection is complete without a piece of Pokemon Fan art. Pikachu is here.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Scarlet Red At layer #10 (0.88mm) swap to Lemon Yellow At layer #15 (1.28mm) swap to Jade White for the rest.