The release for this Friday is a great clockface of a Wolf at attention. Round design just under 230mm in diameter.

Two different STLS with this. One is set up for 5 colors (5th color adds a little more depth to the design. The second STL is for 4 color and has the 3DF available as well. Select the appropriate section below depending on how you wish to print.

Another note - These designs can be 1 color printed and dry brushed. With the way Hueforge operates, much of the design is raised. This is great for dry brushing especially for those that wish to print with 1 color. Heights are set with black first to white top so there is a lot of options with single color printing.

5 COLOR INFORMATION:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 230x230mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #12 (1.04mm) swap to Gray At layer #17 (1.44mm) swap to Beige At layer #23 (1.92mm) swap to Jade White for the rest.

4 COLOR INFORMATION -

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 230x230mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Beige At layer #22 (1.84mm) swap to Jade White for the rest.