Ink art of a samurai - Symbols of the Warrior - Set of Bookmarks
9 downloads · 2 months ago · 4th set for week 20 - Symbols of the samurai.
For these Models:
Print at 100% infill with a layer
4th set for week 20 - Symbols of the samurai.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 63.44x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to Pink At layer #15 (1.28mm) swap to Jade White for the rest.