Horror Classic Scary Clown watching over his Victims - Set of Bookmarks

Bonus Model for this week is 100% the opposite of the other sets shared. Here is a horror classic villain. the evil clown, it, or whatever you call him.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.57x205mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Blue At layer #14 (1.2mm) swap to Orange At layer #20 (1.68mm) swap to Ivory White for the rest.