Week 3 bonus - A different direction with these designs. These are pictures of high heeled shoes as high art.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 74.86x205.01mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Pink Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #14 (1.2mm) swap to Pink At layer #20 (1.68mm) swap to White for the rest.