Bonus uploads for week 8 - This first is a high fantasy depiction of the Green Dragon and his rider. Going for the old masters style of oil painting. Enjoyed putting these together.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x204.81mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Default White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Green
At layer #6 (0.56mm) swap to Beige
At layer #15 (1.28mm) swap to White for the rest.
