He-man's trusty partner, the great Battle Cat from Masters of the Universe
Sharing some art a friend created and shared with me. Turned it into hueforge art for printing.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.63x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to BambuLab Green At layer #8 (0.72mm) swap to Gray At layer #11 (0.96mm) swap to Beige At layer #18 (1.52mm) swap to Jade White for the rest.