Week 13 set 2 - another set with a kinder message. Sweet Dreams set of bookmarks.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x215.4mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Dark Blue At layer #9 (0.8mm) swap to Lilac Purple At layer #14 (1.2mm) swap to Beige At layer #19 (1.6mm) swap to Jade White for the rest.