Fanart Set of Bookmarks from Guardians of the Galaxy - Rocket, Groot and Star-Lord

Updated an older set of Bookmarks and am providing it here on thangs for free. Enjoy this bit of fan art Celebrating Marvel Comics.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basics Yellow Transmission Distance: 6 PLA BambuLab White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Brown At layer #11 (0.96mm) swap to Yellow At layer #15 (1.28mm) swap to White for the rest.