Adding a couple Disney villains as fanart bookmark sets this evening for members. First is Ursula.
For the models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.34x205mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Blue
At layer #14 (1.2mm) swap to Lilac Purple
At layer #18 (1.52mm) swap to Jade White for the rest.
