A second clockface to share with everyone today. This is obviously the DC Comic Character Harley Quinn, companion to the Joker in Batman's world.

If using the 3mf, note that there is a negative column to create the hole for clockwork. Remove if you want it whole.

This is the second of 3 clockface models being shared today. Make sure to like, download and share your prints this week!

For this Model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 223.59x225mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #12 (1.04mm) swap to Pink At layer #19 (1.6mm) swap to Ivory White for the rest.