Fan Art Picture of the Back to the Future Hotrod DeLorean - Free for Limited Time

Free for a limited time -Hueforge depiction of the DeLorean time machine from Back to the Future. Down load it now before it is gone into time.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray At layer #11 (0.96mm) swap to Beige At layer #19 (1.6mm) swap to Jade White for the rest.