A clock model for the members. It is a fanart depiction of Darth Maul on a clock face.
I have not added a hole at the center do to a number of people that didn't catch is was there and didn't want it.
For this Model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm
The Model is 200.69x200mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.64mm) swap to Blue Gray
At layer #8 (0.88mm) swap to Dark Red
At layer #11 (1.12mm) swap to Jade White for the rest.
