Dandadan fan art - Aira Shiratori and Ken Takakura (Okarun) in Demon Forms
2 downloads · 8 days ago · Another Dan Da Dan art piece.
Print at 100% infill with a layer height of 0.08mm with a base layer
Another Dan Da Dan art piece.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 128.52x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Dark Blue At layer #8 (0.72mm) swap to Pink
Border Only Colors from here until the end. At layer #19 (1.6mm) swap to Jade White for the rest.