Crazycars are on the Loose! Primal Pickup is ready to Roll
byBooneCo3dSharing a 4 part car set, or rather car imagination. What if the cars were more than just nice children's favorites. What if they were Monsters? This is what some may look like. Enjoy.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #8 (0.72mm) swap to Mandarin Orange At layer #14 (1.2mm) swap to Jade White for the rest.