Part 2 of this series of carvings. These are more historical in style but still share the epic battle between magic and beast. The Mage vs Dragon battle immortalized.

for these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.9x200mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Brown At layer #11 (0.96mm) swap to Beige At layer #16 (1.36mm) swap to Jade White for the rest.