Michael M
Michael M

Christmas Special - Nightmare Before Christmas Jack and Sally Christmas Clockface - Great Gift Idea

by
BooneCo3d
BooneCo3d
BooneCo3d
BooneCo3d
|
Image 1 of 3
Christmas Special - Nightmare Before Christmas Jack and Sally Christmas Clockface - Great Gift Idea 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 3
Christmas Special - Nightmare Before Christmas Jack and Sally Christmas Clockface - Great Gift Idea 3d model
2D
3D
Makes
Christmas Special - Nightmare Before Christmas Jack and Sally Christmas Clockface - Great Gift Idea 3d model
Christmas Special - Nightmare Before Christmas Jack and Sally Christmas Clockface - Great Gift Idea 3d model
Christmas Special - Nightmare Before Christmas Jack and Sally Christmas Clockface - Great Gift Idea 3d model

Christmas Special - Nightmare Before Christmas Jack and Sally Christmas Clockface - Great Gift Idea

Uploading a new clockface with Jack and Sally dressed in Christmas outfits. Wanted to get this out there early as it could be used as a Christmas gift. Free to all for a limited time.

You will need to drill a hole at the center (or add a negative piece in slicing) for the clock mechanism you choose to use.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #10 (0.88mm) swap to Blue Gray At layer #18 (1.52mm) swap to Ice Blue At layer #20 (1.68mm) swap to White for the rest.