Chibi Art - Little one Photo of the Incredible Hulk from Marvel Comics

Bonuses this week start with 3 from the Marvel universe. Several realistic chibi style little ones - second is the Incredible Hulk.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Green At layer #9 (0.8mm) swap to Beige

Border Only Colors from here until the end. At layer #17 (1.44mm) swap to Jade White for the rest.