Chibi Art - Little one Photo of Captain America from Marvel Comics

Bonuses this week start with 3 from the Marvel universe. These are Additions to the series started several weeks back - chibi style little ones - here is The Captain!

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Beige Transmission Distance: 8.2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Dark Blue At layer #6 (0.56mm) swap to Beige At layer #19 (1.6mm) swap to Ivory White for the rest.