Celtic Knot Carvings depicting Dragons Guarding the way - Set of Bookmarks
byBooneCo3dUpdated this set and made them a bit thicker. Adding this one for the community.
for these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Flat Blue Gray Transmission Distance: 2.5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #12 (1.04mm) swap to Gray At layer #16 (1.36mm) swap to White for the rest.