Another bonus set for week 10 and yes, it is Boba Fett again. He seems to be a strong seller and these were interesting designs. Give the appearance of old wood or trees carved. I can image them on display in his world somewhere.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.33x215.4mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Brown
At layer #12 (1.04mm) swap to Beige
At layer #19 (1.6mm) swap to Jade White for the rest.
