For Friday this week a bunch of different wall art pieces to share. This one is a fairy caught in a bottle.
For this Model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 143.69x210mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Green
At layer #11 (0.96mm) swap to Dark Brown
At layer #13 (1.12mm) swap to Beige
Border Only Colors from here until the end.
At layer #23 (1.92mm) swap to Jade White for the rest.
