Artful Creation - The Back to the Future DeLorean upgraded! - Car Collection Model

Second DeLorean to jump into the Welcome Pack. This one is flying off the page in dramatic fashion!

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 153.75x205mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Blue Gray At layer #8 (0.72mm) swap to Ash Gray At layer #15 (1.28mm) swap to Jade White for the rest.