Bonus piece for members - An artistic render of a armored battle archangel. Enjoy.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 205x205mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Blue
At layer #11 (0.96mm) swap to Ash Gray
At layer #16 (1.36mm) swap to Ivory White for the rest.
