An artists depiction of the Oceans of Japan - Set in Bookmarks

Week 25, a little bit different set. Each one feeds into the others. It is a 3 panel depiction of a geisha and then ocean.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.57x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Green At layer #12 (1.04mm) swap to Mandarin Orange At layer #16 (1.36mm) swap to Ice Blue At layer #20 (1.68mm) swap to Jade White for the rest.