Portable Dice Tower (For 8mm - D6 Dice)

This is a generic version of another dice tower I made for a specific game, and it required smaller dice.

This version has the keyring hole moved from the corner to the center. The whole assembly requires eighteen 6mmx2mm magnets (the bottom part uses double the magnets as the lid).

There are two versions of the tower portion. One that's enclosed, and another that has the tower path exposed. The exposed one is for potentially easier printing, and can be closed off by rotating the magnet cover lid 180-degrees.

There are 3 parts needed: 1 - The Cover 2 - The Tray Portion / Dice Storage 3 - The Dice Tower Piece

I will likely upload more variations of each piece down the road. So you'll only need to print one of each piece.

Piece-1 needs 6x magnets pressed or glued in. Piece-2 and 3 snap into place at the joint.