Its a bonugy! Or a bnuyy! Or a boony! doesn't matter, print this little guy with TPU and stick them on your keys for a little cute pizzazz

Squishy Bunny Keychain!

bonugykeychain v2.3mf

Articulate Slug!

sloogarticulate v1.3mf

Designed for printing in TPU, but you can use whatever filament you want.

Bunny!

bonugy v4.3mf

A headphone hanger designed for the very popular IKEA Alex drawers! Features a simplistic design that is specifically made for ease of printing.

Alex Drawer Headphone Hanger v2.stl

Spiral Vase.stl

3 point spiral vase v3.stl

Its a phone stand! I went a little more fancy this time around... May have to scale it up 5-10% to fit thicker phone cases

Phone Stand!

Phone Stand v6.stl

A second revision, the pieces are printed separately and then slot into place like in the renders. The battery must be installed before assembly, but can be removed if the clip is unmounted from the strap

Quest Battery Clip for Anker Power Core 10000.stl

Anker Power Core 10000 Clip v2.stl

Its a train! Made this a few years back for a class.

choo choo.stl

Sc0tt mk1 v7.stl

Has room for six 9v, 21 AAs, and 30 AAA's
9v should be stored connector-side down in order to prevent accidental shorts

Battery Holder set v2.stl

The lever arm is not long enough currently, as it is designed to have you insert your own handle

Manual Press v10.stl

This is the second turbojet of my design, the first one is not on Thangs. I have no Idea if it works, however it theoretically should....

Turbojet mk2

Phone Stand

This was really just a learning tool for me, but I thought it was cute so I am gonna share it with you guys.

Chibi Among Us Astronaut

This is the third major revision of a set of retractable landing gear I am working on for a pretty hardcore RC aircraft

Landing Gear Mk3 v16.stl

Clip this onto the back of your Meta Quest 2 elite strap to hold this specific battery, dont know if it works with anything else as I havent tried,

Anker PowerCore 10000 Clip for Elite Strap

Requires 608 ball bearings in order to function properly.

Fidget Spinner

Stick a C6-3 rocket motor in this and put a rod though the center for launching, and then light it off, the rotation caused by the motor exhaust will stabilize the monocopter, and create lift, causing it to fly.

Rocket Powered Monocopter

A model aircraft I designed, has no real function other than decor/toy.

I am however working on a function version that will be released in a while.

Blended Wing Aircraft (temp name)

A simple glider that can be shot by a rubber band. Comes with pitch trim tabs The tail should be printed detached and flat, then glued into the slot at the rear of the plane. Print with 50% infill.

SIFF Glider-02 Simplified v2.stl

Clip a rubber band into the end of this stick in order to make launching my series of gliders easier.

Stick launcher for glider

A simple glider that can be shot by a rubber band. Comes with pitch, yaw, and roll trim tabs. Make sure to fold the creases in the wings for best performance, even glue them for extra rigidity. The tail should be printed detached and flat, then glued into the slot at the rear of the plane. Print with 50% infill.


SIFF S Glider-01a v5.stl

A simple glider that can be shot by a rubber band. Comes with pitch, yaw, and roll trim tabs. make sure to fold the creases in the wings for best performance, even glue them for extra rigidity. The tail should be printed detached and flat, then glued into the slot at the rear of the plane


A simple glider that can be shot by a rubber band. Comes with pitch, yaw, and roll trim tabs. Make sure to fold the creases in the wings for best performance, even glue them for extra rigidity. The tail should be printed detached and flat, then glued into the slot at the rear of the plane. Print with 50% infill

SIFF Glider-02f v10.stl

A simple glider that can be shot by a rubber band, make sure to fold the creases in the wings for best performance, even glue them for extra rigidity.

High-School student interested in engineering

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Biosculptor

Achievements

Seedling

Fan Favorite

Explorer

Pinned models

SIFF S Glider-01a v5.stl

SIFF Glider-02 Simplified v2.stl

Manual Press v10.stl

Bunny!

Squishy Bunny Keychain!

Articulate Slug!

Bunny!

Alex Drawer Headphone Hanger v2.stl

Spiral Vase.stl

Phone Stand!

Quest Battery Clip for Anker Power Core 10000.stl

choo choo.stl

Sc0tt mk1 v7.stl

Battery Holder set v2.stl

Manual Press v10.stl

Turbojet mk2

Phone Stand

Chibi Among Us Astronaut

Landing Gear Mk3 v16.stl

Anker PowerCore 10000 Clip for Elite Strap

Fidget Spinner

Rocket Powered Monocopter

Blended Wing Aircraft (temp name)

SIFF Glider-02 Simplified v2.stl

Stick launcher for glider

SIFF S Glider-01a v5.stl

SIFF Glider-02f v10.stl