Zombie Pooh - Filament Painting

This model is for personal use only - V2 FRAME ONLY

VIDEO OF THE PRINT<<

Zombie Pooh, two words I never thought I would use together, is an 8 color filament painting. This model will only be available to club members.

I have included two 3MF print profiles, one for AMS and one for NO AMS. This one could be printed with one AMS. If you assign both whites to the same slot and leave the black and whites in for the whole print you could swap the remaining 5 colors between the slots 3 & 4 in the AMS. If you want to try it that way just assign the colors in the AMS profile as per the guide below. This is a really quick print at approx 4 HRS so I would watch the spools and swap them as soon as they are completed.

If you have any questions about printing this hit me up.

AMS SLOT GUIDE: The model colors will go in and be assigned to the following slots depending how many AMS units you have.

MODEL COLOR - [1] [2] [3] [4] [5] [6] [7] [8]

1 AMS - SLOT --- [1] [2] [3] [4] [3] [1] [4] [3]

2 AMS - SLOT --- [1] [2] [3] [4] [5] [6] [7] [8]

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The profile has a height modifier to print the first 0.64mm @ 0.16 layer height as that is the min depth/non blended portion of the base color. If you use a different slicer set all your color changes before doing the modifier as it changes the amount of layers, or use the #mm value instead. This shaves off approximately half an hour of print time.

DO NOT change the Z dimension. If you substitute filaments results will vary. If you have Hueforge you can import the STL and see how substituted filaments will change the outcome before printing. If you have questions hit me up.

I use the TD-1 to measure my filament opacity which is why you see the names I have assigned to them in Hueforge. This gives me an accurate prediction. Filament TD can vary from brand to brand and even from spool to spool. If you want to measure your own for accurate predictions in Hueforge check out MY WEBSITE where I have official TD-1 units for sale.

Filaments Used: PLA BambuLab Matte TD-1 Ivory White Transmission Distance: 3.8 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA Bambu Lab TD-1 Brown Transmission Distance: 1.4 PLA BambuLab TD-1 Yellow Transmission Distance: 5.3 PLA Polyterra TD-1 Savannah Yellow Transmission Distance: 3.6 PLA BambuLab TD-1 Jade White Transmission Distance: 6 PLA BambuLab TD-1 Orange Transmission Distance: 5.8 PLA BambuLab TD-1 Red Transmission Distance: 4.3 This print uses 8 unique filaments

Swap Instructions: Start with TD-1 Ivory White At layer #9 (0.8mm) swap to Charcoal At layer #10 (0.88mm) swap to TD-1 Brown At layer #12 (1.04mm) swap to TD-1 Yellow At layer #18 (1.52mm) swap to TD-1 Savannah Yellow At layer #20 (1.68mm) swap to TD-1 Jade White At layer #24 (2mm) swap to TD-1 Orange At layer #26 (2.16mm) swap to Charcoal At layer #27 (2.24mm) swap to TD-1 Red At layer #35 (2.88mm) swap to TD-1 Jade White for the rest.