tracking pixel
Profile Image
Bedlam Threadz
Bedlam Threadz

Bedlam Threadz

Follow

Select a membership plan

Model is included in this plan
Available now

Supporter Tier
$10.00
/ month

This tier is for people that enjoy my work and would like to support my ongoing efforts to make high quality models.

This tier allows access to all models that will be both exclusive and early access before public release. Models will be labeled accordingly and all early access models will be a minimum of 60 days prior to public general release. Some models will never be released outside of subscription tiers. This tier does NOT allow for commercial use of designated models. Personal use only. You may download and print these models, but may not sell prints or files and will not distribute any files in any manner.

Model is included in this plan
Available now

Commercial Tier
$15.00
/ month

This tier is for people that are looking to resell printed models that are specifically designated for physical good sales. To resell printed models you must have an active subscription. If you choose to stop subscribing your rights to resell printed models ends as soon as your paid period expires.

Redistribution and resale of the digital files is not allowed, and subscribers acknowledge that Bedlam Threadz has the sole right to distribute, post and sell the digital files provided.

This tier also provides for the ability to request specific models to be created. For requests under this tier models via request will be available to all club members. If you would like a private custom design you can always message me and we can work something out if you would like to retain the rights to specific artwork.

Bedlam Threadz

Pimpington Bear - Filament Painting

by
Bedlam Threadz
Follow
Follow
Remix Model
Bedlam Threadz
Bedlam Threadz
|
Image 1 of 2
Pimpington Bear - Filament Painting 3d model
Bedlam Threadz
Bedlam Threadz
|
Image 1 of 2
Pimpington Bear - Filament Painting 3d model
2D
3D
Makes
Pimpington Bear - Filament Painting 3d model
Pimpington Bear - Filament Painting 3d model

This model is for personal use only - V2 FRAME ONLY

Pimpington Bear is a venture back to a less complex color model. It took me a while to perfect that bling to get that sparkle illusion with only 4 colors. I sometimes forget that not everyone can print these crazy color models I have done because while it is doable without an AMS/MMU, it does require a lot of different filaments. This model will only be available to club members.

I have included two 3MF print profiles, one for AMS and one for NO AMS. This one is only 4 colors so no crazy swap instructions this time. This is a fairly quick print at about 6.5 hours using my provided profiles.

If you have any questions about printing this hit me up.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The profile has a height modifier to print the first 0.64mm @ 0.16 layer height as that is the min depth/non blended portion of the base color. If you use a different slicer set all your color changes before doing the modifier as it changes the amount of layers, or use the #mm value instead. This shaves off approximately half an hour of print time.

**DO NOT change the Z dimension. If you substitute filaments results will vary. If you have Hueforge you can import the STL and see how substituted filaments will change the outcome before printing. ** I use the TD-1 to measure my filament opacity which is why you see the names I have assigned to them in Hueforge. This gives me an accurate prediction. Filament TD can vary from brand to brand and even from spool to spool. If you want to measure your own for accurate predictions in Hueforge check out MY WEBSITE where I have official TD-1 units for sale.


1 Likes0 DownloadsNovember 6, 2024


1 Likes0 DownloadsNovember 6, 2024