AVAILABLE FOR COMMERCIAL RESALE WITH TIER 2 - V2 FRAME ONLY

This Hueforge model is a product of many hours of meticulous color work resulting in an expanded pallet. This model uses 9 colors. AMS/MMU not needed. Manual filament swaps can easily be done with pauses. This model will only be available to club members.

I have included two different 3MF files for Bambu Studio. One for people with AMS unit(s) and one for people without AMS/MMU units.

[1 AMS/MMU Unit] Assign colors 5,6,7,8,9 to slots 1,2,3,4,1 respectively. In this case you will have to wait for color 5 (slot 1) to finish printing before you can put color 9 into that slot. If you are worried about missing swaps in the AMS you can remove spool 4 after it starts printing which will force a pause when it gets to that slot.

[2 AMS/MMU Units] assign slots accordingly. Assign color 9 to slot 1 and swap out color 1 in slot one once it has completed and color 2 starts printing.

[3 AMS/MMU Units] Assign all colors accordingly.

[NO AMS/MMU] - preset pauses, manual color changes.

AMS SLOT GUIDE: The model colors will go in the following slots depending how many AMS units you have.

MODEL COLOR -- [1] [2] [3] [4] [5] [6] [7] [8] [9]

1 AMS - SLOT ---- [1] [2] [3] [4] [1] [2] [3] [4] [1]

2 AMS - SLOT ---- [1] [2] [3] [4] [5] [6] [7] [8] [1]

3 AMS - SLOT ---- [1] [2] [3] [4] [5] [6] [7] [8] [9]

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The profiles have a height modifier to print the first 0.64mm @ 0.16 layer height as that is the min depth/non blended portion of the black. If you use a different slicer set all your color changes before doing the modifier as it changes the amount of layers. This shaves off approximately half an hour of print time. If you decide to resize this file DO NOT scale the Z dimension or it will fail to blend correctly. If you use different filaments results will vary. If you have Hueforge you can import the STL and see how different filaments will change the outcome before printing. If you have questions hit me up.

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Blue Transmission Distance: 1.1 PLA PolyLite Stone Blue Transmission Distance: 0.5 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Purple Bambu Transmission Distance: 5 PLA PolyLite Magenta Transmission Distance: 1 PLA PolyTerra Sakura Pink Transmission Distance: 2.8 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA BambuLab Matte Ivory White Transmission Distance: 4.4

Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Blue At layer #14 (1.2mm) swap to Stone Blue At layer #18 (1.52mm) swap to Ice Blue At layer #22 (1.84mm) swap to Purple At layer #26 (2.16mm) swap to Magenta At layer #30 (2.48mm) swap to Sakura Pink At layer #35 (2.88mm) swap to Savannah Yellow At layer #39 (3.2mm) swap to Ivory White for the rest.