CUSTOM FRAME - v2 - 208x208.stl
This model is for my models in the members area only. It will not fit standard 200x200 prints as the prints are modified to be 208x208. The reason for this is so that the extra 4mm on each side rest inside the frame and therefore the full 200x200mm print is visible from the front. All models that use this frame will be clearly marked: “V2 Frame Only”.
You only need to print one lock type per frame. The square lock is for thinner prints that may bow when not supported on all sides. I rarely make thin prints so you should be good with the default lock in most instances with my models.
If you want to modify my models in the non-member area, or your own Hueforge models to fit this frame, follow the instructions below. NOTE: you will need to pay attention to the “Min Depth” setting in Hueforge. This setting is basically how thick it will print the base layers before starting to print the art in the base color. I use 0.64mm as I find that is a nice thickness to prevent bowing on models that have large amounts of the base color visible.
Create a plane/cube in your slicer that is 208x208x0.64mm Center the plane/cube. (Usually right click → Center) Import your Hueforge model Center your Hueforge model. (Usually right click → Center) Select both the plane/cube and the Hueforge model and assemble them. (Usually right click → Assemble) You are good to go. You now have a 208x208 Hueforge model that will fit this frame and make the full image visible.I have included the 3MF for Bambu Printers as that is what I have. You can always open the files in the slicer and copy any other settings to your own slicer of choice if you wish.
The frame is printed @ 0.16mm layer height w/ 3 wall loops.
The locks are printed @0.20mm layer height w/ 3 wall loops.