tracking pixel
A

COVID Mask Sealer.stl

by
Apanthropus
Follow
Follow
Remix Model
A
Apanthropus
|
|
Image 1 of 9
COVID Mask Sealer.stl 3d model
A
Apanthropus
|
|
Image 1 of 9
COVID Mask Sealer.stl 3d model
2D
3D
Makes
COVID Mask Sealer.stl 3d model
COVID Mask Sealer.stl - The Mask-Strap acts as a lever to compress the wrinkles over the cheek and sealing the mask. - 3d model
COVID Mask Sealer.stl 3d model
COVID Mask Sealer.stl 3d model
COVID Mask Sealer.stl - Tighten the sealer to the front. It can easily be adjusted while wearing. - 3d model
COVID Mask Sealer.stl 3d model
COVID Mask Sealer.stl 3d model
COVID Mask Sealer.stl - Thread Guide - 3d model
COVID Mask Sealer.stl 3d model

Disclaimer: This does NOT make the mask a higher standard by any (medical) means!

This Medical-Mask Sealer should help to improve the air sealing of the simple and cheap medical masks. Especially for those with rather small or narrow head shape! Easy and fast (~6min) to print!

It reduces the airflow along the cheek and more air is actually filtered through the mask itself.

Please follow the threading instructions! (Community Uploads) The strap should press the leveler part of the sealer outwards (!) therefore compress the wrinkles of the face mask. - Best preformed in front of a mirror for the first couple times. The sealer should be tightened as far to the front as possible. It can be adjusted while wearing.

If you do not have a printer, this sealer could also be cut from stiff plastic or carton board.


7 Likes13 DownloadsApril 22, 2021


7 Likes13 DownloadsApril 22, 2021