bought a car recently with a broken vent clip thingy.
desined and printed a new one. its not as tight as factory one but its all one peace and just clips in without any issues. all you need to do is make sure that the grabbers interface with the correct inside fin that controls the others for left-right movement.
the tolerances aren't tight so anyone should be able to make it, even my stringy mess of a  moded ender 3 did it. (you will need supports tho)

kia rio vent clip

kia rio vent clip v1.3mf

case for heltec lora 32. (v2 and v3)
has space for 2 18650 batteries, a rotary encoder and neo6m gps module.
also a power switch.

im attaching the .f3d file so anyone can edit this in fusion 360.
feel free to remix it.

lora32 case with 18650, gps, rotary encoder. #meshtastic

meshtastic case v22.3mf

a simple knob for a rotary encoder, meant to be press fit.

rotary encoder knob

Body6.3mf

a simple little case i desined with fusion 360 for Heltec LoRa32. im using it to make meshtastic nodes. 
it has a space for an 18650 battery, the board itself, an SMA connector and a 29x67x10mm space below the board for any aditional things you might want to add. (sensors, antennas, speakers,GPS...)
ive attached a .f3d file so anyone (fusion 360 has a free teir) can quickly modify the file for their needs (change atenna hole, add a place for a switch)
with a battery inside the case can also stand tilted slightly back for easy visibilty to the screen, not tested without battery yet.
it fits my Heltec LoRa32 v2.1 nicely, i havent tested it on v3 yet but i should fit just fine.

oh, also the buttons for the top cover were inspired by this little case: https://www.printables.com/model/78782

EDIT: 
v14 added better support for heltec lora32 v3 board. the cover (furthest away from the main body if you download .3mf) has slightly larger button pins so there is less travel, and the updated main body can now better fit  version 3 board. there is also now a variant with support "legs" if you want to use bigger antennas while being upright as well as individual legs if you want to glue them on to the old case (when legs are added it doesent sit flat so only use if you intend to have it standing)



Heltec LoRa32 case (with 18650)

meshtastic case v10.3mf

meshtastic case v14.3mf

meshtastic case v12.3mf

lost the buckle of the band, printed this one with PETG and it held up for a few months just fine. more of a temporary solution tho

mi band buckle. 

made to protect the pins on the battery charging dock for dji mini 2. might work with other chargers but i havent tested. i printed this out of TPU so it holds on, didnt test how it works with PLA or other harder fillaments

dji battery port cover

dji charger port cover

so the idea here is to have a payload on a little string with a loop hanging around this. when you want to drop just jiggle the drone back and forth and the sting slides off.

v2: is a bit smaller, also allows to attach some 3d printed landing legs i have.

dji mini 2  drop attachment point (for strings).3mf

so the idea here is to have a payload on a little string with a loop hanging around this. when you want to drop just jiggle the drone back and forth and the sting slides off.

this is a 2 part cover that i made for a small personal project, its supposed to have a mesh in the middle to act as a dust filter. feel free to modify it if you find it useful.

50mm fan cover (2 part)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Aljaz77

Achievements

Seedling