Jade is made from rare elements. This makes jade something very special. Just like our dragon. We came across this design after a lot of research. It couldn't be too sweet, but slightly pretentious so that it lived up to the name.
I'm excited about your prints. If you want, you can post your print in the Discord under [show your model] and inspire others. Please also write which filament you used.
We used Rainbow Filament silk for printing. Unfortunately, it doesn't have the same effect with a matt filament. We therefore recommend using silk filaments or filaments that are shiny. As an alternative, you can of course use your print with a shiny polish, white nail polish.
EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function
DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.
The invitation comes immediately with access to our exclusive design.Print parameters. We recommend: first layer height 0.16mm layer height 0.16 mm Wall lines: 3 Fill density: 6% Surface pattern: concentric. In various tests, this produced the best result for our taste. SUPPORT settings: No support. Print on place If someone has problems with silk filaments, drying the filament helps a lot. In our opinion, optimal humidity should be 25%-30%
We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users