UPDATE:

we have now added MR Turtle too. Unfortunately, we haven't taken any photos of MR Turtle yet. The file is at the bottom

Bow to the majesty. We have designed a baby turtle here. Originally the design was without a crown, but we thought that a crown would go perfectly with this sweet face. If anyone would like this design without a crown, we can provide this to you.

Not only the sweet face, but also the look fascinated us. It just has such an innocent face that we just can't say no. :D

---

EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function

---

DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together. The invitation comes immediately with access to our exclusive design.

Print parameters. We recommend: first layer height 0.16mm layer height 0.16 mm Wall lines: 3 Fill density: 10% (Optional: Zseam -> behind) Surface pattern: concentric. In various tests, this produced the best result for our taste. SUPPORT: not absolutely necessary. We printed everything without support. Without support, there may be minimal unsightly prints on the lower surface, but these cannot be seen when the model is placed. If someone wants to enable support, we recommend the support tree with default settings