Little guardian baby dragon - compatible with Toniebox

UPDATE:

We reinforced the floor a little. The first layers were very thin and did not impress with high quality. Unfortunately, this was lost on us. Thank's for the Tipps. This enabled us to correct various small cosmetic defects. The floor now appears to be of higher quality

All files have been updated

Our most popular has received a new feature :D

This was a request from the community for the Toniebox. I don't think it would be a lie if I said this is unique. There is definitely no design like this in this world :)

For those who no longer have a Toniebox, no worries. We will also bring other designs. For us it is important that there is a good mix so that everyone gets something from our designs. we also want to create this dragon for amazon dot5 speaker.

The split version is of course not as good as the original version because you can see the cut at the back. But I hope you like it anyway. Unfortunately, it was not possible to display it any other way for those who cannot print the dragon body in one go.

I hope for all resellers and Toniebox owners that you like this design :)

For the sellers among you

Please make sure you know how to sell this design without getting into legal trouble. We are not an official or unofficial partner of Toniebox. As far as we are informed, you are allowed to sell it if you do not mention Toniebox in your description or write that it is suitable for the Toniebox. But I'm not a lawyer :)

EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function.

Some slicers like Simplyfy3D have problems with the easy painting function because they do not support this function. If anyone has problems, just report them in Discord and we will put together a special file for you.

DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.

The invitation comes immediately with access to our exclusive design.

Print parameters. We recommend: first layer height 0.16mm (If someone wants something a little finer, then with 0.12)

layer height 0.16 mm (If someone wants something a little finer, then with 0.12) Wall lines: 2 Fill density: 10% Support: no support needed

I would recommend that you glue the pieces together at the end

We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users

If anyone has problems with the slicer, please use the file without the Easy Painting System. As we have discovered, some slicers cannot do anything with this particular setting. Luckily only a few are affected