With our last design model #18 we announced that there would be another keychain of this design. Now the time has come :)

In this design we have rounded the horns a bit so that it is not too pointy. However, the tips may be a bit sharp as the model is printed in small size. We would recommend carefully rounding off the tips with fine sandpaper after printing so that no one gets injured.

We recommend sandpaper with a very fine grain.

EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function

DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.

The invitation comes immediately with access to our exclusive design.

Print parameters. We recommend: first layer height 0.16mm layer height 0.16 mm Wall lines: 3 Fill density: 15% Surface pattern: concentric. In various tests, this produced the best result for our taste. SUPPORT settings: No support. Print on place We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users