Easter egg with a bunny money giver

We've heard that some of you like to give away money at Easter. This is how our community desire came about.

We have designed a simple Easter egg here that is easy to close. We deliberately left the design "empty" and gave the design an egg surface structure. This comes into its own with bright and matt filaments and it just feels crazy.

We didn't do this out of laziness, but out of tradition. So you or your children can paint the eggs according to your wishes and ideas.

The bunny has a hole in the back where you can put the money. It's not just giving away money. The children can go looking for the egg and find a nice Easter bunny with money.

Since this was a community request, I hope you like this idea :)

EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function

DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.

The invitation comes immediately with access to our exclusive design.

Print parameters. We recommend: BABY BUNNY:

first layer height 0.16mm layer height 0.16 mm Wall lines: 3 Fill density: 10% Surface pattern: concentric. In various tests, this produced the best result for our taste. SUPPORT: yes, tree support. Activate support only on the printing plate Support upper interface distance: 0,2 mm EASTER EGG:

first layer height 0.16mm layer height 0.16 mm Wall lines: 2 Fill density: 10% SUPPORT: yes, standard support (not tree support) SUPPORT upper interface distance: 0,00 mm

By the way, you can remove the support much more easily with a spatula. I would recommend this to everyone. Just be careful with it, as these things are really sharp

We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users