Bioluminescent is a natural phenomenon that never ceases to amaze, especially in fungi.
This is a model inpired by the bioluminescent mushroom Omphalotus Illudens and uses a glow in the dark filament.
There is a screw on stick to plant it on a vase or on the ground, and optionally a mossarium base.

Grow your personal mini mossarium
Keep your pot plants company with a little fungal light
Plant them in your garden to mark paths at night
Place the in your bedroom for company and as night light
 
The Omphalotus  is also called jack-o'-lantern mushroom and is orange. Its bioluminescence, a blue-green color, can be observed on the gills of fresh specimens in low light conditions once the eye becomes dark-adapted. This is due to an enzyme called luciferase, acting upon a compound called luciferin, leading to the emission of light much as fireflies do when glowing.

 
**How to:**
Print with glow in the dark filament (the most accurate color would be orange with greenish glow). Be sure to have a well cleaned plate and no air drafts. The cube modifier is used to remove fuzzy skyn in the middle section.
Print the screw on stick to plant in a pot.


**How to Mossarium option:**
Print the mossarium base, screw on the mushroom
Go for a moss hunt, you can find it in the nature or even in cities in non directly lit places.
Gater some with a knife or spatula.
Place it on the mossarium and mist with water from time to time.
 

Check the others in my mushroom series, and follow and boost if you enjoy!


----------

**Support me or start selling prints of this product now on patreon.com/alchemicmatter
**


Mushroom Mossarium - Omphalotus Illudens

AM_Glowing-Omphalotus.3mf

Bioluminescent is a natural phenomenon that never ceases to amaze, especially in fungi.
This is a model inpired by the bioluminescent mushroom Mycenia Singeri and uses a glow in the dark filament.

Keep your pot plants company with a little fungal light
Plant them in your garden to mark paths at night
Place the in your bedroom for company and as night light
 

**How to**
Print with glow in the dark filament
Cut a piece of filament around 15cm long from the spool
Melt one side of the filament with a lighter and insert it in the hole at the bottom of the mushroom cap
Optionally melt the base of mushrooms together.

**How to Mossarium option:**
Print the mossarium base and adapter, screw on the adapter
insert the moshrooms filaments in the base holes
Go for a moss hunt, you can find it in the nature or even in cities in non directly lit places.
Gather some with a knife or spatula.
Place it on the mossarium and mist with water from time to time.

**Support me or start selling prints of this product now on [patreon.com/alchemicmatter](https://www.patreon.com/alchemicmatter)**

Bioluminescent Mushrooms - Mycenia Singeri

AM_Glowing-Mycenia.3mf

AM_mossarium+adapter.3mf

Glöð (gloeth, nordic god of light) is a high-visibility glow in the dark triangular spiral clip that securely fits on laces, strings, backpack, molle and pretty much everywhere. It's perfect for nighttime runs, outdoor gear, or finding items in low-light conditions.
The simple design is very flexible and can be used in many ways:

- On the shoes safe late running
- On the backpack or belt for visibility during hiking
- Doubles as a carabiner

Glöð Hi-Vis Multiuse Clip

AlchemicMatter_Glow-charms.3mf

This is a simple pendant of the Owl Cave symbol in “Twin Peaks”, the mysterious and cryptic emblem found in the Owl Cave

Owl Cave Pendant - Twin Peaks

AlchemicMatter_Owl-cave.3mf

Inspired by Walt Disney's "Bedknobs and Broomsticks" (1971).

Experience the enchantment of Astoroth without venturing to the Isle of Naboombu with this detailed replica of his star.

 

The ancient Substitutiary Locomotion spell is inscribed on both sides of the star, in relief on the front side.

 

"Treguna Mekoides Trecorum Satis Dee"

Star of Astaroth - Bedknobs and Broomsticks

Astaroth-star.3mf

A signet ring inspired by Game of Thrones for House House Blackfyre with detailed dragon scale texture and relief Targaryen symbol. This design is intended for a .2 nozzle.
BambuLab 3mf with shape modifier with second color applied.

**Size chart
**
In the file the ring is already scaled at 117,2% which is the most common male ring size of ISO 62 (US size 10, 20.16mm inside diameter ). Scale back to 100% to obtain ISO size 54 (6 and ¾ US, 17,2 mm inside diameter), which is the most common female ring size.
Follow the attached size chart.

Blackfyre Ring Signet - Game of Thrones

AlchemicMatter_GOT-Ring-Blackfyre_AMS.3mf

A signet ring inspired by Game of Thrones for House Arryn, featuring the moon an the bird. This design is intended for a .2 nozzle.
BambuLab 3mf with shape modifier with second color applied.

Size chart

In the file the ring is already scaled at 117,2% which is the most common male ring size of ISO 62 (US size 10, 20.16mm inside diameter ). Scale back to 100% to obtain ISO size 54 (6 and ¾ US, 17,2 mm inside diameter), which is the most common female ring size.
Follow the attached size chart.

Arryn Ring Signet - Game of Thrones

AlchemicMatter_GOT-Ring-Arryn.3mf

A signet ring inspired by Game of Thrones for House Lannister, featuring the raised emblem of the lion. This design is intended for a .2 nozzle.
BambuLab 3mf with shape modifier with second color applied.
 
Size chart

In the file the ring is already scaled at 117,2% which is the most common male ring size of ISO 62 (US size 10, 20.16mm inside diameter ). Scale back to 100% to obtain ISO size 54 (6 and ¾ US, 17,2 mm inside diameter), which is the most common female ring size.
Follow the attached size chart.

Lannister Ring Signet - Game of Thrones

Lannister_01.3mf

A Game of thrones inspired signet ring for House Stark with detailed texture and relief symbol.
Already colored in Bambu studio for minimal filament change; works best with .2 nozzle.

 

**Size chart**
In the file the ring is already scaled at 116% which is the most common male ring size of ISO 62 (US size 10, 19.76mm inside diameter ). Scale back to 100% to obtain ISO size 54 (6 and ¾ US, 17,2 mm inside diameter), which is the most common female ring size.
Follow the size chart attached.

House Stark Ring Signet - Game of Thrones

AlchemicMatter_GOT-Ring-Stark_1col.3mf

A signet ring inspired by Game of Thrones for House Tyrell, featuring the raised emblem of the Tyrell rose. The design includes color changes on separate layers, which are not painted but rather programmed (hence the monochromatic preview). This design is intended for a .2 nozzle.

 

**Size chart**
In the file the ring is already scaled at 117,2% which is the most common male ring size of ISO 62 (US size 10, 20.16mm inside diameter ). Scale back to 100% to obtain ISO size 54 (6 and ¾ US, 17,2 mm inside diameter), which is the most common female ring size.
Follow the chart attached for a detailed reference.


[Follow me](https://thangs.com/designer/Alchemic%20Matter) to stay updated with the rest of the series.

Tyrell Ring Signet - Game of Thrones

AlchemicMatter_GOT-Ring-Tyrell_AMS.3mf

A Game of thrones inspired signet ring for House Targaryen with detailed texture and relief symbol.
Already colored using a modifier solid with just one filament change; works best with .2 nozzle.
 

**Size chart**
In the file the ring is already scaled at 116% which is the most common male ring size of ISO 62 (US size 10, 19.76mm inside diameter ). Scale back to 100% to obtain ISO size 54 (6 and ¾ US, 17,2 mm inside diameter), which is the most common female ring size.
Or follow the attached chart as a reference.

[Follow me](https://thangs.com/designer/Alchemic%20Matter) to stay updated with the rest of the series.


House Targaryen Ring Signet - Game of Thrones

AlchemicMatter_GOT-Ring-Targaryen_AMS.3mf

The Ouroboros is an ancient symbol of a snake eating its tail dating back to Egyptian iconography and Greek magical tradition. It was adopted as a symbol in Gnosticism and Hermeticism and most notably in alchemy, representing eternal cyclic renewal and the cycle of life, death and rebirth.

It's minimal but at the same time the higly detailed scale pattern gives it a diamond like nature, reflecting light in ever changing ways. The thin metallic line completes the effect with a professional artisanal look.
 Wear it, roll it with your finger as a fidget toy and to meditate.
 

**Features**
Ancient alchemic symbol of rebirth and life.
Highly detailed but minimal.
Artisanal high quality look.
Very strong.
0.2 or 0.4 nozzle
Easy to print and quick with just 2 color changes.
 
**If you don't want to support me or have commercial rights to sell this design, on my makerworld profile you can find the [free version](https://makerworld.com/en/models/464604#profileId-373270).**

Ouroboros Ring

AlchemicMatter_Ouroboros.3mf

It's just an egg, but it has a surprise inside, and can be cracked open to reveal the content in an original and alternative way to give someone a present. Start the print, pause it (around 130 layers in, it already should have a pause in the sliced file), put the surprise inside, and finish the print.


**Features**
No seams or mechanisms, the content is completely sealed inside
Put anything you want inside. The diameter for regular is around 4cm, for medium 5cm.
Original gift. Very simple yet original idea to surprise someone
Beutifully simple
It looks like an egg
It's not an egg
 

**Tips**
It's just one layer thick so it should be easy to open. In case just do the opposite of what's generally soggested to get strong layer adhesion.

If you scale it up, consider that the wall will scale up too and will get harder to break, use the bigger version.

Keep the print pause short to keep the seam invisible.
Needs arachne active. Tested in pla.

Crackable Surprise Eggs

egg.3mf

Join the circle and recieve commercial rights to sell physical 3D prints of selected Alchemic Matter designs.

- List up to six different 3D printed Alchemic Matter models and sell up to 100 units per month online or in person
- Download up to 12 Premium Alchemic Matter models every month

Crafter

Enter the circle gaining access to all model, with 6 downloads per month included.

Initiated

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Alchemic Matter

Achievements

Seedling

Up and Coming

Pinned models

Ouroboros Ring

Arryn Ring Signet - Game of Thrones

Bioluminescent Mushrooms - Mycenia Singeri

Mushroom Mossarium - Omphalotus Illudens

Bioluminescent Mushrooms - Mycenia Singeri

Glöð Hi-Vis Multiuse Clip

Owl Cave Pendant - Twin Peaks

Star of Astaroth - Bedknobs and Broomsticks

Blackfyre Ring Signet - Game of Thrones

Arryn Ring Signet - Game of Thrones

Lannister Ring Signet - Game of Thrones

House Stark Ring Signet - Game of Thrones

Tyrell Ring Signet - Game of Thrones

House Targaryen Ring Signet - Game of Thrones

Ouroboros Ring

Crackable Surprise Eggs