This bundle allows you to custom build your own Inner City Building unit with full interior.
A building unit consists of a ground floor, a top floor and any number of middle floors (including zero) to create your custom height building.
**A floor consists **of a front and back wall section (which are interchangeable) and at least one side wall section per side, thus allowing you to extend the depth of your building.
The **interior **consists of three types of staircases, one for the ground to the mid floors, one for the mid floors to other mid floors or the top floor and one from the top floor to the roof. There are two types of floor sections, one for the middle floor(s) and one for the top floor.
The roof consists of two roof types (with or without the skylight) and an optional roof extension for each unit of depth you want to go beyond the first. The roof also comes with a cabinet entrance.
The unit also comes with optional interior walls and fire escape sections. All the stairacses, including the fire escape ones are designed for models on 25mm bases.
Included in the bundle are three pavement sections with a dimension of 12"x6", 10"x5" and 6"x4" respectively.
The building sections have been designed for FDM printing but pre supported files are included for everything for resin printing. The fire escape sections are best suited for resin printing.
The wall sections come with 3mm wide x 2mm deep cylindrical holes suited for neodynium magnets allowing you to fully magnetize your building.