AFO 3
AFO 3

SAND SAFE 2 (With Keys and AirTag)

by
AFO3D
AFO3D
Follow
AFO3D
AFO3D
|
Image 1 of 10
SAND SAFE 2 (With Keys and AirTag) 3d model
AFO3D
AFO3D
|
Image 1 of 10
SAND SAFE 2 (With Keys and AirTag) 3d model
2D
3D
Makes
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model
SAND SAFE 2 (With Keys and AirTag) 3d model

SAND SAFE 2 (With Keys and AirTag)

KEEP YOUR MOST VALUABLE THINGS HIDDEN WHILE YOU TAKE A DIP INTO THE SEA.

It includes an AirTag compartment so you can bury it and find it with ease and a little print-in-place handle to carry it.

NEW VERSION IMPROVEMENTS:

  • LOCKER KEY FOR EXTRA SECURITY.
  • NO THREADS (sand gets stuck and blocks them sometimes)
  • BETTER AIRTAG LOCKING CAP
  • PRINT IN PLACE
  • STRONGER HANDLE
  • BIGGER AND POINTIER
  • Share your prints!!

(ASA or ABS is recommended)

It's recommended to use the print profile provided, supports are already in place and tolerances tested. Assembly: I used this 16mm locker key: https://amzn.to/4drbgi3 (This is an affiliate link)

  1. INESRT THE SAND SHIELD ON THE LOCKER KEY
  2. TIGHTEN THE LOCKER KEY FROM THE OTHER SIDE WITH THE NUT
  3. ALIGN THE METAL LATCH AND TIGHTEN THE SCREW THE LATCH NEEDS TO BE ALIGNED WITH THE KEY LIKE SHOWN, TO LOCK IN PLACE.
  4. AND YOU ARE DONE!

Maybe you will need to help the cap come loose with some plyers.

Follow me on: Instagram: https://www.instagram.com/afo3d/ TikTok: https://www.tiktok.com/@afo3d Youtube: https://www.youtube.com/@AFO3D

Licensing All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website. If you wish to sell this model print, subscribe to my thangs commercial license.

-AFO


82 Likes181 DownloadsSeptember 11, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialABS
Layer height0.2 mm
Infill density15 %
SupportsNone
BrimNo
Nozzle size0.4 mm
Infill styleGyroid